10 DIY Resin Keychains That Sell on Etsy

This post may contain affiliate links. As an Amazon Associate, this site earns from qualifying purchases at no extra cost to you.

DIY Resin keychains are an easy way to turn small scraps and little treasures into something beautiful and unique. From pressed leaves to tiny photos or Kintsugi-inspired gold accents, each piece can feel personal and special. These keychains are perfect for gifting, keeping, or selling on Etsy, where shoppers love handmade gifts and one-of-a-kind designs.

Troubleshooting & Helpful Tips

What If Your Mold Doesn’t Have a Hanging Hole?

Some silicone keychain molds include a built-in peg that creates the hanging hole automatically, while others leave the piece completely solid. If your mold doesn’t have a hole, simply let the resin cure completely, then drill a small hole near the edge using a pin vise or small drill bit. Attach a jump ring through the hole before adding the key ring.

How Do I Keep Bubbles Out of My Resin?

Mix the resin slowly to avoid introducing air, then let it rest for a minute or two before pouring. After filling the mold, pop any surface bubbles with a heat gun, small torch, or by gently blowing warm air across the resin. Avoid overheating, which can damage silicone molds or cause the resin to cure unevenly.

Why Are My Flowers, Leaves, or Paper Changing Color?

Natural materials and paper can darken or become translucent when resin soaks into them. To help preserve their color, seal dried flowers, leaves, and paper with a thin coat of Mod Podge or a clear acrylic sealer before embedding them in resin. Let the sealant dry completely before pouring.

1. Kintsugi Resin Keychains (Elegant & Customizable)

Turn resin keychains into chic, personalized keepsakes inspired by Kintsugi, the 1. Kintsugi Resin Keychains (Elegant & Customizable)

Create resin keychains inspired by Kintsugi—the Japanese art of highlighting “breaks” with gold. This style works beautifully for personalized gifts or boutique-ready pieces, and it’s surprisingly beginner-friendly when you understand how to build the design in layers.

Materials

Clear or lightly tinted resin
Silicone keychain molds
Gold leaf sheets or gold mica powder
Fine permanent pens
Silicone mixing cups and stir tools
Keychain Hardware Kit

Step-by-Step

1. Mix Resin
Blend resin and hardener slowly to reduce bubbles. Let it rest for a minute so air can rise.

2. Create the Base Layer (⅛ inch)
Pour a thin, even layer into the mold. This gives your “gold seams” a subtle backdrop.

3. Form the Kintsugi Lines
Tear gold leaf into thin, organic shapes—avoid straight cuts since Kintsugi lines look natural and irregular.
• Lay small pieces in meandering paths across the resin.
• Leave slight gaps to mimic “cracks” rather than full coverage.
• If using mica powder, dip a toothpick into the powder and drag light strokes through the tacky resin to create fine, vein-like lines.

4. Let It Reach a Tacky Stage
Wait 20–40 minutes (varies by brand) until the resin feels sticky—not wet. This keeps gold from drifting or sinking.

5. Add Personalization Without Smudging
Once the surface is tacky or fully cured (depending on your design):
• Apply tiny vinyl names/initials above or beside the gold lines to frame the design.
• Or use a fine-tipped permanent pen to write directly on the surface—short strokes work best. Let it dry fully.

6. Seal With a Final Resin Layer
Pour a thin coat over the entire piece. The resin should self-level and seal in the gold + personalization without distortion.

7. Cure Completely
Let the keychain harden for 24–48 hours. Demold, lightly sand edges if needed, and attach the key ring.

Pro Tip

Use neutral or pastel tinting for the base layer—soft blush, bone white, cloud gray, sage, or pale lavender. These tones make the gold “cracks” pop while keeping the overall look sophisticated and gift-ready.

2. Floral Resin Keychains (Eco-Friendly & Chic)

Encapsulate delicate dried flowers for artisan, eco-friendly keychains. Perfect for Etsy or gift-ready keepsakes.

Materials:

Step-by-Step:

  1. Mix Resin: Combine resin and hardener carefully. Stir slowly to minimize air bubbles.
  2. Pour a Base Layer: Pour a thin, clear layer of resin (filling the mold about halfway). This prevents the flowers from sinking or floating awkwardly to the surface.
  3. Arrange Flowers: Place your dried flowers face-down into the liquid resin (since the bottom of the mold will be the front of the keychain). Use a toothpick to gently push them into place and pop any bubbles trapped under the petals.
  4. Fill and Cure: Gently pour the remaining resin over the flowers to fill the mold. Let it harden completely for 24–48 hours.
  5. Finish: Pop out, smooth edges if needed, and attach key rings.

Pro Tip: Choose flowers with vibrant colors and press them fully. Bonus Tip: To keep colors from fading or looking “wet” when resin hits them, seal the dried flowers with a thin coat of Mod Podge and let them dry completely before embedding!

3. Tech-Inspired Electronics Resin Keychains (Modern & Edgy)

Upcycle circuit boards or wires into tech-inspired keychains for a modern, stylish look.

Materials:

Step-by-Step:

  1. Prepare Electronics: Cut scraps to fit molds and remove sharp edges. Always wear safety glasses and a dust mask for this step, as cutting circuit boards creates fine fiberglass dust that you don’t want to breathe in.
  2. Mix Resin: Combine thoroughly.
  3. Place Elements: Set your circuit pieces face-down into the mold.
  4. Pour Resin: Cover pieces carefully with resin.
  5. Cure Fully: Allow 24–48 hours for resin to harden.
  6. Finish: Pop out and attach key rings.

Pro Tip: Use small, flat circuit pieces for a clean, wearable design without bulk.

4. Glitter Explosion Resin Keychains (Bold & Eye-Catching)

Create sparkling keychains with suspended glitter for a fun, vibrant accessory.

Materials:

Step-by-Step:

  1. Mix Resin: Combine resin and hardener.
  2. Add Glitter: Stir glitter evenly throughout the resin.
  3. Pour into Molds: Fill molds with glittered resin.
  4. Adjust Placement: Use a toothpick for desired glitter arrangement.
  5. Cure Fully: Let harden completely.
  6. Finish: Pop out and attach key rings.

Pro Tip: Layer multiple glitter colors or sizes for added depth and sparkle.

5. Pressed Leaves Resin Keychains (Seasonal & Elegant)

Encapsulate pressed leaves to celebrate seasonal foliage in chic, boutique-style keychains.

Materials:

Step-by-Step:

  1. Mix Resin: Stir resin and hardener slowly to prevent bubbles.
  2. Pour the Base Layer: Fill the bottom half of your mold with clear resin first to create a solid backdrop for your foliage.
  3. Arrange Leaves: Place the leaves flat, face-down into the resin. Use a toothpick to press them flat and work out any air bubbles trapped beneath the leaf.
  4. Pour Over Leaves: Carefully pour the final layer of resin to fill the mold completely.
  5. Cure Fully: Allow 24–48 hours for hardening.
  6. Finish: Pop out and attach key rings.

Pro Tip: Press leaves for at least a week to ensure flatness and color preservation. If you notice your leaves turning translucent or losing color in the resin, brush them with a thin layer of clear sealant first to lock in their natural colors!

6. Photo or Mini Art Resin Keychains (Personalized & Charming)

Turn tiny photos or miniature artworks into unique keychains.

Materials:

Step-by-Step:

  1. Prepare and Seal Images: Trim your photos to fit the molds. Brush a thin layer of Mod Podge or clear glue over the front, back, and edges of the paper. Let it dry completely before proceeding. (This keeps the resin from making the paper look wet or greasy!)
  2. Mix Resin: Combine thoroughly.
  3. Layer Images: Place images in mold, pour resin gently.
  4. Cure Fully: Allow resin to harden completely.
  5. Finish: Pop out and attach key rings.

Pro Tip: Always make sure your sealant layer is fully dry before pouring resin over it to prevent bubbling.

7. Metallic Flake Resin Keychains (Luxe & Modern)

Embed metallic flakes in resin for high-end, boutique-ready keychains.

Materials:

Step-by-Step:

  1. Mix Resin: Combine resin and hardener.
  2. Add Flakes: Sprinkle flakes evenly.
  3. Pour into Molds: Fill molds, adjust flakes with toothpick.
  4. Cure Fully: Let harden completely.
  5. Finish: Pop out and attach key rings.

Pro Tip: Add a touch of mica powder to enhance shimmer and depth.

8. Geometric Resin Keychains (Minimalist & Modern)

Craft clean, modern keychains with geometric shapes.

Materials:

Step-by-Step:

  1. Mix Resin: Combine thoroughly.
  2. Pour into Molds: Fill geometric molds evenly.
  3. Optional Design: Add layers, swirls, or small accents.
  4. Cure Fully: Let harden completely.
  5. Finish: Pop out and attach key rings.

Pro Tip: Layer different colors or add subtle glitter for a high-end minimalist look.

9. Confetti Resin Keychains (Fun & Playful)

Embed colorful confetti for playful, festive keychains perfect for gifts or Etsy shops.

Materials:

Step-by-Step:

  1. Mix Resin: Stir resin and hardener.
  2. Pour a Base Layer: Fill the molds about halfway with clear resin first.
  3. Layer Confetti: Sprinkle your confetti pieces into the liquid resin, using a toothpick to distribute them evenly so they float nicely throughout the piece. Cover with the remaining resin.
  4. Cure Fully: Allow 24–48 hours.
  5. Finish: Pop out and attach key rings.

Pro Tip: Use confetti in complementary colors or metallic tones for a chic, elevated look.

10. Ombre Resin Keychains (Trendy & Stylish)

Create gradient resin keychains with layered colors for a modern, eye-catching accessory.

Materials:

Step-by-Step:

  1. Mix Resin: Prepare multiple shades of resin.
  2. Pour in Layers: Let your mixed resin sit for about 10–15 minutes until it starts to thicken slightly (like a gel). Start with your lightest color, pouring each layer gently so the colors don’t bleed completely together.
  3. Blend Gradually: Tilt or use a toothpick to create smooth gradient transitions.
  4. Cure Fully: Allow resin to harden completely.
  5. Finish: Pop out and attach key rings.

Pro Tip: Use subtle color shifts for an elegant, upscale ombre effect suitable for gifts or boutique sales. From florals to metallics to playful confetti, these keychains are small, charming, and full of personality — perfect for any artisan shop.

←
→

GET ON THE VIP LIST

Sign up to be the first to get notified about new content, offers and more.

Discover more from Spark Something Living

Subscribe now to keep reading and get access to the full archive.

Continue reading